AND/OR 2.0 Rubber cork

for floors and/or walls

AND/OR 2.0 replaces Capri’s very successful AND/OR rubber cork originally introduced in 2009.

AND/OR 2.0 offers a selection of refined neutrals and fresh bold colors. Created with EPDM granules and cork dust, USA made AND/OR 2.0 is suitable for a variety of commercial and residential installations.

For flooring installations AND/OR 2.0 offers enhanced slip resistance, comfort under foot, exceptional durability and sound absorbing qualities. Vertically AND/OR 2.0 can be used as a tackable surface, wall protection and can be used to cover doors and structures and wrap columns.

AND/OR 2.0 Standard Formats
3.2mm 4′ x 25′ Rolls 
8.2mm (double layer installation, 3.2mm rolls over 5mm rolls) for horizontal only
12.2mm (double layer installation, 3.2mm rolls over 9mm rolls) for horizontal only

AND/OR 2.0 Non-Standard Formats
3.2mm: 24″ x 24″ Square edge tiles (incremental minimums will apply) *
8mm: 4′ x 25′ Rolls (incremental minimums will apply)
* 24″ x 24″ square edge tile lots yield 232 sf. Installations over 232 sf will consist of multiple lots and shall be designed accordingly.

Site applied finish coats are required for all flooring installations (including fitness areas), vertical installations below chair rail height and floor to ceiling installations. Finish coats are optional on vertical installations above chair rail height and when used as tackable surfaces.
Shade variations are possible and skive/knife marks from the manufacturing process are inherent.

AND/OR 2.0 is Declare Label Red List Free, FloorScore certified and listed on mindful MATERIALS.

The monitor settings on your computer/device may affect the colors of the Capri products shown on this website.